Pages

Tampilkan postingan dengan label the. Tampilkan semua postingan
Tampilkan postingan dengan label the. Tampilkan semua postingan

Minggu, 10 April 2016

Seen at the 2014 Sailboat Show Part 3 the Zim 15

One of the hidden casualties in the ongoing clash between Laser Performance Europes business strategy and the rest of the small boat sailing world has been the virtual stoppage of production of the Vanguard 15, a two-hander racing and recreational dinghy that, since the late 1990s, has sold well in the United States and still has a national presence. As with any vacuum in the market someone will step in and in this case Steve Clark, one of the original team that developed the Vanguard 15, has linked up with Zim boatbuilders to produce his higher-end version of a hiking doublehander, the Zim 15.

Zim Sailing freely admits they are targeting the post-collegiate market with the Zim 15 and it comes with a bunch of modern performance features, albeit at a higher selling price compared to the Vanguard 15. What modern features do you get?
  • A hull designed for higher speeds.
  • Carbon spars.
  • High aspect ratio blades.
  • Roachy Mylar sails.
  • Gnav vang to clear up the forward end of the cockpit.
  • A multi-purchase rig-tensioning system run through the forestay.
  • A bow stem made of high-impact plastic.
  • A dangly whisker pole.
  • A flow-through double bottom cockpit with open transom.
  • Enough cleats in the right positions to make adjustments easier.
Some photos.

Here is the bow bumper which is cleverly molded in during construction so as to be an integral part of the hull.


The Zim 15 has a centerboard for easier launching but the centerboard trunk has grooves in each side so the board can be pulled up and "reefed" in a breeze, just as you would with a daggerboard.


The dangly whisker pole is not seen in the U.S much but is very popular in the U.K. non-spinnaker classes. It resides on the front of the mast when going upwind. To deploy, pull the dangly pole down with its control line. To retract. uncleat the control line and a shock cord returns it to the front of the mast. There is also the multi-purchase forestay tensioner sitting on the foredeck in front of the mast.


The flow-thru double-bottom cockpit with the nifty tilt-up rudder. The hull sports soft-chines as it was also designed for team racing.


The business end of the cockpit. We can see the Gnav vang on top of the boom, the dangly pole, recessed cleats in the wide thwart and plenty of adjustments at the base of the mast.



A computer-rendered sideview of the Zim 15 (lifted from Zim Sailings website).



Read More..

R2AK The Marathon Begins

"In the name of uncomfortable fun!"

R2AK, the Race to Alaska, a 750 mile jumbo version of the Everglades Challenge, started the 2nd and final leg yesterday. The first leg, raced last Thursday, was a 40 mile sprint from Port Townshend, Washington to Victoria. The rules are simple; no engines, no outside assistance.

Unlike the Everglades Challenge, the R2AK racetrack is open water, very cold and some of the entries are sensible, full out cruising craft. I expect once the dust has settled, the racier catamarans and trimarans will fill the top spots. I dont envy those hardy kayakers in their kayak-trimaran hybrids who will spend the entire race ensconced in their dry suits.

For those who like to get their online jollies by watching the R2AK unfold, the organizers have got that covered - just click here for the race tracker.

There is at least one large open dinghy racing (editors correction: There are two - a Mirror 16 is also competing). Team Barefoot is the product of Barefoot Wooden Boats and is a Tad Roberts design, a 5.8 meter (19 foot) plywood dinghy playing in the same design space for long distance small boats as the i550 mini-sportboat. In looking at the video, the Barefoot dinghy appears to be more in the realm of a high freeboard Classic International 14 from the 1980s. Team Barefoot put this interesting video up on their dinghy and the thoughts behind designing for this race.



Team Barefoot Wooden Boats | Race to Alaska 2015 from Vancouver Maritime Museum on Vimeo.

Designer Tad Roberts has the sideview and sailplan of the Barefoot Dinghy over here.

Some photos of the Barefoot Dinghy I pulled from the InterWebs.





It turns out that Classic Mothist, Jeff Linton, is pursuing the same direction for the next Everglades Challenge. He has scrapped his modified Flying Scot (which won the monohull class in 2014) and is home-building a new 6.7 meter, O.H. Rogers designed, large dinghy for next years Challenge. Boatbuilding details with lots of photos are over at Amy Lintons blog.
  1. Part 1 here
  2. Part 2 here
  3. Part 3 here
  4. Part 4 here
  5. Part 5 here

Read More..

Sabtu, 09 April 2016

Classic Moths in the Mist

At this years Classic Moth Nationals we had a marine layer settle in Saturday night, giving us fog on Sunday morning, a rare event for Elizabeth City, North Carolina. The fog started to creep out towards Pamilco Sound around 9 a.m. and racing commenced, on time, in sunshine.

I took a couple of photos.

The fog didnt stop the sailors kibitzing about Mothboats.


Two transoms in the mist. The Laser transom of the Maser and the wide Europe Dinghy style transom of the Mousetrap Mistral.


The view from the Pughs pier.



The original post of the 2015 Classic Moth Nationals can be found here.

Read More..

Rabu, 06 April 2016

It is getting close! The Metal Boat Festival 2014!

We are a few weeks away from the 2014 Metal Boat Festival! You you have an interest in Metal Boats, I hope to see you there. 


Read More..

Sailing Alone Around The World

No, not me! Definitely not on the bucket list! We are content to have sailed between Eastport, Maine and Grenada, West Indies -- only about 6,000 miles, round trip, less than a fourth of the distance of the equator and one must also put in a lot of northing and southing to circumnavigate. Europe still glimmers in my mind but is improbable. There are many ports in the areas we have sailed that we have not entered.  And the "alone" part has no appeal to me either. I believe that I could handle the boat but Im far too social an animal. Without Ilene it would be no fun. And in certain longitudes one encounters pirates. No thanks.

No, the sailor in question is Captain Joshua Slocum.  A New England Yankee retired merchant sea captain:  both square riggers and steamships. Slocum set off for his 38 month adventure when he was in his fifties during 1895-98. His was the first such long cruise for pleasure.

I read his account, a classic, at the suggestion of my friend Jim. It is quite interesting and well written with footnotes explaining some of his few archaic sailing terms and references to the personalities and current events of the day (meeting Stanley of Stanley and Livingston in South Africa; avoiding mines when entering Newport RI during the Spanish American War). He also included 65 illustrations (no photos) among the books 265 pages. These include his boats sail plan, lines, and other views and views of some of the more exciting incidents. His writing is better than mine but shares a common characteristic: an unemotional recounting of the facts which speak for themselves; he does not need to characterize them. He was opposed to witchcraft and I believe organized religion, and liberal in his political outlook except as to race and colonialism, in which he was of his times. He includes in the narrative as to each stop along the way, his dates of arrival and departure; from this someone could calculate the number of stops and the percentage of sailing days as compared to lay days, as I do in this blog at the end of each of ILENEs long cruises.

"Spray" his wooden gaff rigged sloop (reconfigured as a yawl half way round), was only 37 feet long on deck, compared to ILENEs 42 feet (but with a long bowsprit and aft extension for the sheet of the jigger, Spray was quite a bit longer than ILENEs 45 feet overall). She was 14 feet wide compared to ILENEs 12, with less draft, concrete ballast instead of lead and double the weight. And he had rebuilt her himself using hand tools on the hulk of an old fishing boat. And Spray had no engine or fuel tanks, no refrigeration, no GPS, no EPIRB, no chart plotter and no radio -- he was rather alone out there, taking pleasure in frequently referring to himself as "the crew of the Spray."

My interest in this book was enhanced when I toured a modern-day, fiberglass, larger-scaled replica of Spray at the dock of Marina Cay in Tortola in November of 2010, before Ilene and the kitties joined me there for our trip down to Grenada. The replica had modern amenities and was home to a family with several small children.

Slocum was a self educated man about writing as well as about the sea. I could not help but compare his chapters to posts of this blog. Of course my own adventures and accomplishments pale by comparison to his, qualitatively as well as quantitatively, but both of us are sailors who write. Generally, when I read, I find the stories interesting substantially to the extent that I can identify with and compare myself to the characters. There are a lot of things in this book to which I could identify.  He wrote comparing himself to the early explorers, who did not have accurate clocks or charts and found himself wanting; and I am not a fraction of the sailor he was.

Yet there are many episodes that resonated for me. He wrote that following a big storm he took out his palm and sewed a new sail to replace the torn one, calling it "serviceable if not beautiful". I recalled my adventure aboard On Eagles Wings this past winter during which I used such a palm to repair a sail.

He was given a set of books by the widow of Robert Louis Stevenson during a visit to her island in the South Pacific off South America. This put me in mind of the generosity to me of Eve, the widow of Selwyn, a great sailor of our club and a great mentor to me.

Nearing home Slocum encountered the USS Oregon, which I learned about in the Oregon History Museum. She signaled "CBT" -- i.e., "Are there any men of war about?", referring to Spanish warships, to which Slocum flew the negative flag.

An interesting unresolved question that this book raised involves usage. When I hail another ship, my usage, which I believe is the common one today, is "Ahoy [name of vessel]". The "Ahoy" serves to capture the attention of the listener to listen for the name of his or her boat. Slocum, if he greeted us would reverse this: "ILENE Ahoy!" There is a lot of "ahoying" in the book and it struck me as wrong each time. I wonder when and why the custom changed.

He described an incident in which he mistook the light of a lighthouse flashing on wave crests as a reef, way to close, and the scare it gave him, This reminded me a moment of horror of my own off the Maine coast one dark and stormy night in 1992 -- the moon peaked out from behind the clouds, low, near the water and I thought it was a strong light on a large ship crossing our bow.

Slocums description of the joy of a landfall at the end of a long voyage will resonate with every cruiser and his description of ports in my home waters --from New York to Maine -- were very rewarding.

He did not keep cats like ILENE and humorously described a short passage with a goat which had been given to him as a gift. He used rope instead of chain to tie the goat to the mast and after eating through the rope the goat ate Slocums hat and his chart of the Caribbean

He had a few groundings and was hit by another boat while at anchor; all things that have happened to me and are going to happen to you if you are out there enough.

He tried to tow a much larger boat that had grounded but the captain refused his offer and the ship was later lost. On my first boat, "Just Cause;" I went out from the safety of Three Mile Harbor (the back door of Easthampton, Long Island) to tow in a much larger sailboat, and during another Club cruise was the beneficiary of a tow from a power boat when both my engine and the wind failed (Thanks again, Stu).

News of Slocums voyage had spread and he was greeted as a celebrity in most ports, large and small, and fees were waived while he was feted by the local dignitaries. This has not been my experience.

He also traded in merchandise that he picked up along the way in Port A for sale in Port B; you couldnt take the merchantman out of him. And later in the voyage he was given the use of lecture halls to earn money by telling his sea stories.

The most exciting portion of the trip was his circumnavigation of the western half of Tierra del Fuego, which lies between the Strait of Magellan and Cape Horn. This was also where he encountered natives who were pirates. He had not intended to circumnavigate these islands, but upon exiting the Strait into the Pacific,   he was hit by a storm that simply blew him back south and east of the Horn. The book contains several charts of his path, and a separate one for the tip of South America where all of this action occurred.

Having transited a good part of the Pacific from an island 340 miles west of Chile in 43 days, he passed just south of the Marquesas without stopping there and continued for another 29 days nonstop to Samoa -- 72 days at sea. He read a lot underway and reported on what he read.

He also had many pertinent observations on the winds tides, currents mileage made good, sun sites, and such matters as crossing the Equator and crossing his own track.

One amazing feature of his boat and his own skills was that he could trim his sails so well that he could lash his wheel in place and let the boat steer itself for days at a time. Only once, in a storm, did he tend the wheel by hand for 30 hours. Many people doubted the veracity of this self steering assertion and he repeats it several times with an illustration of how he lashed the wheel but with the caveat that he could not vouch that boats with large overhangs, fore and aft, could perform this way.

This will be the last nautical book review in this blog -- for 2014. I plan to help a friend bring his boat from Essex CT to Annapolis at mid month.
Read More..

Minggu, 03 April 2016

The i550 and the Chesapeake Challenge

Last May I ventured over the Bay Bridge to Kent Island to look at Chesapeake Light Crafts OcoumeFest and also to look at some of the competitors in the inaugural WaterTribes Chesapeake Challenge long-distance along-shore marathon (an offshoot of their Everglades Challenge). They were starting that Sunday morning of the OcoumeFest.

Of particular interest was the 17-foot i550 sport boat specifically built by the Gougeon brothers for these type of events. The race poses several challenges that a modern small sailboat is not normally designed for; low bridges, traversing very shallow water, human propulsion when the wind quits and for those endurance types, the ability to keep going on little-to-no-sleep. It is a race where it is tough for a sailboat to keep up with those machine-like kayakers who maintain a steady, grueling pace.

Bob Ames, John Z and I had an interesting conversation with the two sailors who were piloting the Gougeon i550 sport boat Hot Canary; Joe Frohock, the creator of the Mothmaran, being one of the team.

Click here for the Gougeon article on building the i550 Hot Canary.

Some photos:


The sleeping arrangements - just simple camp-mats laid on the floor under the cuddy cabin.


This is Joe Frohocks life-jacket. The following live on his life jacket during the race. A very sharp serrated knife, electrical tape, a whistle, a mirror, a high-pitched rescue whistle, a waterproof flashlight (and several other items Ive forgotten -I think he also had an EPIRB).


A mast tabernacle so the mast can be quickly pivoted down to get under bridges. It turns out this wasnt quite enough, the freeboard on Hot Canary too high for one of the bridges in the race. They were stuck in front of one low bridge for several hours until the tide went out.


A rudder cassette allows the rudder to be pulled up or "reefed" for shallow water steerage. The mulit-part shock cord assemblage allows the aft part of the cassette to bounce back in case of a hard grounding.


The sideview of the i550 sport boat. The i550 is specifically designed for home-building in plywood and has a flat bottom panel.


The rowing station was a simple carbon plank that sat on the side decks, just behind the lifting daggerboard trunk. Rowing the i550 was not one of the designs strong points. The flare to the i550 sides can be seen at the transom.


Joe Frohock, Bob Ames, John Zseleczky



Read More..

Dinghy Cruising Around the Eye of Quebec

This is a good video if you can block out the time - 40 minutes. A duo spend two weeks going around a natural circular body of water in central Quebec, formed by the impact of an asteroid.

From the blurb accompanying the video:

"The Eye of Quebec (Lac Manicouagan) is visible from space as a perfectly ring-shaped lake. Its center island is far larger than the water that surrounds it. 100km in diameter, it is the fourth largest meteor impact site on earth. We sailed around it and think that was the first ever circumnavigation of the reservoir under sail and oar. (We can find record of two other sailboats that have attempted the trip. While were not sure of their success, both appeared to carry auxiliary engines. If it wasnt the wind pulling us it was our backs.)

Three years ago, when John and I drove the Trans-Labrador highway, we camped one night on the shores of the great Manicouaga and it captured our imaginations. Finally, this year, aboard the expedition re-fitted Wayfarer 4610, we made the voyage. We were on the water for about twelve days after a two day drive north. It is an astronomically great lake.

We camped ashore every night, and packed nearly 100 Ibs of dried food for the journey. We wore drysuits most of the time, cause the weather was typically cold and wet!



Circumanic Higher Res from Scott McDougall on Vimeo.

More information on the "Eye of Quebec" from Wikipedia.

Read More..

Selasa, 29 Maret 2016

Working on a July Launch Date for the Optimist

My brothers and I have slowed our building of the Optimist down to a crawl. However, my brother Darren has taken the lead and wants the first boat to launch on July 4th.

He has purchased sail, tiller and extension, blades (rudder, centerboard), gudgeons from APS - Annapolis Performance Sailing.

To protect the chine he has laid down a 2 inch strip of fiberglass cloth in simple-clear polyester resin. It should provide a bit of resistance to any "hard blows" on rocks that make up the shore of our part of Lake Ontario.

Polyester resin is quick to harden and very easy to sand. It costs about half the price of shipping epoxy to us. Its just a short drive to the auto parts to pick up a quart.





Read More..

Senin, 28 Maret 2016

Adding Hull Panels to the Optimist Pram


Adding the hull side panels was pretty straight forward. We hand-planed the chine logs so that they would be level along the bottom of the boat. We used 3/4" stainless steel woods crews from Jamestown Distributors. I set the width for the screw holes by spreading my index and pinky fingers wide apart and making that distance on the chine and stringer attachment points. We used about 50 wood screws per side panel. Liberal amounts of PL Construction Adhesive were applied along the chine and stringers and things went well.

A video of the experience:

Read More..

Geezer Racing The Gentlemans Way

The formula:
  1. Get a small two-man dinghy with, and this is important, NO SPINNAKER!
  2. Make sure the wind is light so NO HIKING! (Well, maybe some leaning out is OK.)
  3. Assign one geezer as PORT helmsman and the other as STARBOARD helmsman which eliminates any one person actually crossing the entire boat on tacks
  4. Enjoy whatever the competition brings!




Read More..

Minggu, 27 Maret 2016

The need of keeping water out of the bilge of a metal boat

I always start my surveys on metal boats by using Thermal Imaging of the hull. This helps me locate the structural components of the metal boat. I am also looking for trapped moisture and/or water. If this is found, then there is a good chance there will be corrosion. Next I conduct an inspection of the bilge of the boat, including, anchor, sail, cockpit lockers, and lazarettes. Now I have a very good idea where to concentrate my UTM-audio gauge. I take readings of the whole hull, but will do more readings in the areas of concern.

When I see water in a bilge of a metal boat beyond what might be in a sump I get concerned. I would like to see dry bilges on all metal boats, but this is not always possible. On Tuesday I surveyed a steel trawler. Overall this boat looked to be in fair condition, but then I saw the water in the bilge, a lot of it! There was heavy scale in some areas because of the standing water.  I knew this was an area I needed to spend some time getting thickness readings.

The next day I did my audio gauge. My readings indicated plate wastage. In some areas I could not get a reading that most likely is caused by heavy scale. My visual inspection from inside confirmed the heavy scale. When I arrived at the boat I noticed some weeping from what I hoped was paint blisters. Then an hour later water stared streaming from one of the blisters. Just to think only the paint was holding this section of plate together.

The good news! The boat was out of the water it will not sink. Steel boats can fixed; by cropping out the bad plate and adding new. In a short period of time, she will be underway again.

The moral of this story? If you own a metal boat keep an eye on the bilges.

I will post photos in my next post.
Read More..

Kamis, 24 Maret 2016

Our Part in the Harlem Yacht Club Cruise of 2014


Sunday Aug 3 - Work Day on the Mooring

The Club Cruise ran from Aug 1 to 10 but ILENEs part became five nights and five days, with three nights with the main contingent of the Club Cruise in Mattituck and the Seatauket YC on the North Shore of Long Island. I worked four hours the day before we got started. I found the missing green washer for the dinks air pump -- under the dink and made some progress on pumping it up, but it is not right yet. But we will be on anchor, on dock or on a mooring with launch service for this entire mini-cruise so the dink will not needed. So I moved the outboard from the cars trunk, the gas tank from the boat and the air pump from the dock -- all three to the locker with the oars I found located there buried under the winter covers. Also, I am not putting the water maker into service until we leave for the winter -- unless the manual says it cant remain pickled for a whole year. Id hate to foul up that expensive piece of machinery.

Other work included: (1) sawing the three pieces of veneered wood to close up the port aft cabinet to size, though installation requires return of our drill which was lent out; (2) cleaning birds mess off the dodger which needs more scrubbing. Actually is is not guano but fish guts, scales and bones -- birds being such messy eaters;
(3) attempting to knock out the booms thumb cleats, which was not successful, though I did learn that the first reefing line had been led through the forward part of the boom on the wrongside of the thumb cleat, which was what was causing the harm to the line. So by releading and repairing this line I may not have to do the knockout or replace the line; (4) locating and installing the hatch board bag and inserting the boards therein and installing the cafe doors. These doors put me psychologically into cruising mode. Im ready!

Mon August 4 - Prep Day and Sleep Aboard, Anticipating an Early Start

This was mostly a land day for prep, provisioning and packing. We loaded the car, including the cats, and arrived at the Club at 8:30 pm. After getting everything aboard and put away, we slept peacefully in calm water. This was the cats third trip to the boat this season and they did not complain about being locked in their stuffy carrier in the car. I think it is because they have associated the carrier with boating, which they seem to love. So much for my amateur feline psychiatry.
Whitty: "Do I look like Im worried"

Alphie: "Im Captain of all I survey"
Our efforts to keep out flying biting pests at night was thwarted by the cats ability to "break and enter" by pushing in the screens covering the small side opening ports. They want free rein of ILENEs cabin AND exterior, 24/7. But if we close these ports, the screens cannot be pushed through and the cats have to elect between the two sides of the boat: in or out.

Tues August 5 - HYC to Port Jeff Cove

Underway at 7:00 am for six hours. It was eerily still with mist on the water that the sun had not yet burned off but fine visibility. We were the only boat moving. We waved to some fishermen on the Morris YC dock. By nine a.m. there were a few other boats out but far away. We motored the entire way and never set a sail. Normally a sail will stabilize the boat against rocking but the seas were flat calm with occasional 2 or 3 knot winds, so rocking was not a problem. It was a day made for power boaters, who like flat seas, but not for sailors. Perhaps all that great wind in July has blown itself out and we will have to content ourselves with weak weather sailing conditions in August.  
Clouds and Northport stacks mirrored on the water

Our wake, if you can call it that, as if cut through oil
The last time I recall sailing with such views was crossing the Caicos Banks.  See blog: "Judy and Meridel and Turks and Caicos Part 1", April 3, 2012.



 We took someones mooring in the big cove to starboard just past the breakwater in Port Jeff, hoping the owners didnt show up that evening, but there are about seventy private moorings here and only five boats at the maximum. On a weekend its quite different. Lunch, a nap and then chores before dinner, reading and sleep.
My primary chore was removing, repairing and reinserting the first (red) reefing line. The strength of such a braided line is in its core. The outside, which we see, protects the core from chafing and makes it feel better in ones hands. The covering was all bunched around the two ends and about six feet of the white core, where it runs through the boom, were bare. So the first thing I did was to pull on the cover from the ends to the middle, over and over. Gradually the cover moved toward the middle until the bare spot was only about eight inches long. Then I sewed some light thread through the cover and the core, to try to hold things in place. Then red electrical tape was wound around the remaining exposed core. The reefing line certainly carries a heavy load. More experienced sailors who may think this is a bad idea, please chime in. Otherwise, time will tell if this red line parts, and if the storm is severe enough to do this to the red line, there is the second black reefing line waiting to take its load.
My other chore was installation of self adhesive rubber weatherstripping to the underside of the cover of the aft port lazarette -- the propane locker. Practical Sailor magazine told me that this compartment should be locked and watertight, except for a hole in the bottom, through which any propane that leaks from the tank, being heavier than air, could escape outside the boat. We have gotten some water in this lazarette, when heeled in the rain, because it was not watertight. Most of this water escaped through the hole in the bottom but its much better bone dry. The latch went on this past winter and now the weatherstripping.

August 6 - Port Jefferson to Mattituck

We hoisted the main at the mooring at about 8:30 but also used the engine to head north out of Port Jeff, through its wide channel, rather than tack in there. Then northerly winds made the next two hours of our 25 mile eastward passage something of a beam reach and the genoa got to play as well. With full sails, and a bit of help from the tides, we were making speed over ground in excess of two thirds of the apparent wind speed, averaging better than six knots, and without the engines noise. But starting at about 11:00 the winds dropped to behind us and in strength so we had to use the engine the rest of the way. There was a mess in the compartment under the cabinet under the galley sink, which I cleaned up while Lene maintained the watch. She also had the helm from the breakwater up the two mile long bending bayou-like creek to the dock at Strongs Marina. We did this at low tide which made for a nervous time. In the bayou the deep water is not in the center and at times was only five inches below the bottom of our keel. We were on the dock, across from "Blast," Ernie and Camilles big Albin trawler, by 1:30.
This was ILENEs first docking this year except for her initial watering. I worked the afternoon, washing the top of the boat, filling the port water tank and then I caused a very expensive stupid mistake -- by not following the advice I always give to Ilene. "Make sure that the deck fill hole into which you put the water hose says WATER".  Yes, I put the fresh water hose from the dock into the starboard fuel tank. Water being heavier than diesel, it went to the bottom of the tank and pushed a few gallons of diesel fuel out onto the deck and into the water before our neighbor, Bert, yelled that we were spilling fuel. Probably a few gallons, which subjected us to a potential fine and cleanup costs from the Department of Environmental  Protection. I mopped up what I could and did get to the marinas very nice pool to cool off a few minutes before its five PM closure time.
Im sure these guys didnt like my mucking up their home.
I think it was the anticipation of that dip which caused me to not be thinking about the right deck fill. A shower and dinner with our new friends, Bert and Margie of the fast powerboat "Blue Bell" from Mashpee, on the Cape and Florida. Dinner was at Paces Dockside, the restaurant on the marinas grounds. Bert bought a bottle of wine and shared it with me. And another good nights sleep before I had to face the music the next day.

August 7 - Lay Day in Mattituck

The morning was pleasant, with a walk into town to visit the hardware store, post office, book store, grocery, drugstore (for a postcard to send to my granddaughter), cheese store, and wine shop. But the afternoon entailed taking up the entire cabin sole to get to the top opening of the forward fuel tank (where the inoperative fuel gauge is inserted). That hole is inconveniently located directly under the one small piece of the sole that holds all the other pieces together. About 60 1.5" wood screws were removed. John is an excellent mechanic but took three very expensive hours to do what he could have done in a fraction of that time if he had been supplied with a stronger pump attached to larger diameter hoses. Out came the pink diesel fuel and the water, all told about 40 gallons, into five gallon cans which were poured into a fifty five gallon drum that was hauled off to an authorized hazardous waste disposal site. The pumping done, I shooed John out and put the boat back together again myself. Too late for that refreshing dip today. Instead the bitter pill of the bill. Lets just say with the replacement of forty gallons of diesel fuel my mistake cost north of one grand. And I have remarked how proud of myself I am when I accomplish a new task on the boat. So I better fess up about how rotten I feel about a stupid very costly mistake that harmed the environment. I know better and it wont happen again.

Dinner was a pot luck affair at a picnic table in the marina. This would have been better if we had had six or ten boatloads of folks. As it was there was us, Ernie and Camille from "Blast" and Marcia and Mark from "Leeds The Way". 
Marcia is the Clubs current Fleet Captain, a position I held for a few years and that Ernie held for more than 20 years before me.  We love cruising but can do it without the Club, such as our 93 days in Maine last summer. It is sad that those who could benefit from our experience do not avail themselves of this resource. Anyway, there was no shortage of good food and beverages among our tiny group.

August 8 - Mattituck to Seatauket YC, in Port Jefferson Harbor

Underway from 10 to 4:30. We tried to sail and actually did sail a few miles, close hauled, easterly, along the North Shore of L.I. But we tacked to a northerly course and stayed on it too long. Too long because the wind had shifted and we could no longer sail east so we gave it up, keeping the main up for stability and headed directly for the Port Jeff breakwater, with the wind directly in front of us. Turning south to enter the harbor, the wind helped us and we sailed to about 150 yards from the mooring field, headed into the wind, popped the main halyard clutch and expected to hear the familiar "whoosh" of the mainsail tumbling down into its bag. But no whoosh. I went to the mast to tug down on the sails luff. Nothing doing. I told Lene to head back out into the open part of the harbor and watch our depth and for other boats, like this ferry coming out,
while I would get into the bosns chair and she would haul me to the top of the mast (using the spinnaker halyard) where I planned to use pliers to unscrew the shackle and let the sail fall down. Luckily the wind was light, reducing both heeling and our speed. Lene said "Check the mast." Smart girl! Somehow, two loops of the end of the port lazy jack halyard had worked loose from their coil and in fact four lengths of this thinner line had become wedged between the main halyard and the housing of its block at the base of the mast. I managed to get the sail down by pulling the halyard through this block, a few inches and then feet at a time. Once the sail was down and stowed, we were able to take a guest mooring and then came the task of fixing the problem. First I cut the lengths, about 2.5 feet that stuck out from the block. Then I tried pulling the stuck bits out with pliers. I removed the block and its shackle from the base of the mast to make the work easier. Next it was knife, ice pick and pliers, trying to pluck fibers from the errant bits but this was very slow going.

Fluff

Notice how flattened these formerly jammed bits are compared to the width of normal line.
 (If anyone knows how I can get rid of the underlining below, which is unintended, please let me know, thank you.)
I thought to pull the main halyard out of the shackle in the direction I had pulled to get the sail down, to thereby relieve the pressure in the jam. But this would have required use of the snake, to get the line back through its channel under the deck after it was freed. The same snake used earlier on this voyage to repair the reefing line, had been put away in a safe place and could not be found. Lene is the one who always wants things to be put away and I should let her do the putting because she is better at the remembering. In any event, after diligent search, no snake. So another plan was needed. I noticed that the block seemed to be held together with three small Allen bolts and disassembled it. Then everything could be easily removed. A similar jamming had occurred in the block at the clew of the small jib during the passage from Providentiales in the Turks and Caicos to Mayaguana in the Bahamas. Some physicist is going to have to tell me about what force of magnetism draws small lines into the narrow spaces between larger lines and the housings of their blocks.
Free at last.
Roger, Mark, Ernie, Marsha, Lene and Camille -- after ice cream.
Dinner was at La Parilla, good Spanish food, followed by the traditional desert of the Harlem Cruise -- ice cream.

August 9 - Seatauket YC to Harlem YC
Port Jeff waterfront from our mooring; ferry docks to the right.

We got off the mooring at 7:45  and at 8:00. Huh? Well, Lene and I had a "failure to communicate." She did not hear me say "Reverse," to back away form the ball, and took my pointing out where the ball was as a direction to turn toward that side. We drove the boat over the mooring, getting its lines tangled on the propeller. So I got a refreshing early morning salt water dip and got us off in short order, without cutting any lines.  In the harbor we saw about five knots of wind from the north and hoisted the main in anticipation of a beamy starboard reach while we retraced the first days passage, in the opposite direction. We even set the genoa, a couple of times. But the wind died. This time, it being a Saturday, numerous wakes of large high horse-power floating big-ego machines roiled the surface so the main did serve its anti-rocking purpose. A rather boring passage and we were on our mooring at 2:20 and home in our apartment at 4. So, while a lot of things went wrong, everyone got home safely and a good time was had by all.
Read More..

Seen at the 2015 Annapolis Sailboat Show The Small Cats

Foils, foils and more foils. Foils were the centerpiece of attention for two very interesting small catamarans on display at the 2015 Annapolis Sailboat Show.

The Nacra 15 junior catamaran was the first cat that I stumbled upon as I wandered the show, sitting next to the Melges 14. It had all the bells and whistles of the modern cat, double trapeze, square-top rig, assymetric spinnaker with tube launcher though what stood out were some nifty foils usually not seen on a production catamaran. The problem with the high aspect, tall rigs of the modern cats is that, when married to a short hull, they pitchpole spectacularly. To work around this problem the designers of the Nacra 15 have fitted curved daggerboards and anti-diving winglets on the rudder. The curved daggerboard provides upward lift when fully down. This unweights the leeward hull and keeps the bow out. The anti-diving winglets on the rudder take over when the pitch angle starts to go negative, applying force to hold the stern down. Despite just a couple of production prototypes sailing in the fall of 2015 the Nacra 15 impressed ISAF enough to be named their official junior catamaran in December, 2015.

If I was marketing director over at Nacra I wouldnt keep this platform only for junior sailing. What about offering a second, smaller rig with only a single trapeze and making a detuned Nacra 15 class targeted for couples?

More about the Nacra 15 here.

In this photo is one of the curved daggerboards. Also the entire deck between the beams is covered in SUP anti-slip foam.


The small rudder winglets.


Promotional video of the Nacra 15 at speed.




The second catamaran to catch the eye was the spectacular, all carbon, foiling 5.4 meter/17.7 feet Whisper from England. The platform weighs just 78 kg. The moldings and fine detail work was exquisite. The foils are typical to what is used on the International Moth, T-foils up forward, controlled by a wand, and a T-foil on the rudder. I didnt hang around long enough to get an explanation on how it is all adjusted but I did have a short conversation with Robb White, the builder. He said the foils were designed for early lift-off (more area), and not ultimate speed.

Only $30,000 USD if you have a burning desire to be the fastest one on the river (and if you have the time and crew to learn how to sail her).

More info on Whisper by clicking here.




Yachting Worlds Matthew Sheehan put out this video on his sail test of the Whisper foiling cat. At the end of the video, Matthew, like many in the media, feel that foiling will take over the sport. I, on the other hand, feel foiling will always remain an enthusiasts niche - not one for the general sailing population.




Read More..

The Archipelago Rally Uncovers another Gem The International 12

Last years Archipelago Rally uncovered a historical gem with the entry of Yarrow Thornes Crosby Skimmer Moth. This year, another historical rarity made an appearance at the Archipelago Rally; Woody Underwoods International 12. (this is the American International 12, not to be confused with the lapstrake, George Cockshott 12 Dinghy, which is also sometime referred to as the International 12 and popular in Europe.) The International 12 was the first sailing dinghy to be built using hot molded veneers held under pressure in an autoclave, a building method that allowed mass production of a very strong, lightweight monocoque wood hull. It was a very revolutionary technology but also a temporary technology as fiberglass construction of boats came to the fore in the late 1950s, early 1960s. Thousands of wood boats were built post WWII using hot molded, autoclave construction. Most were small outboard runabouts but some are the familiar sailboats of today including the Fairey Marine and USOD International 14s, Thistles, Luder 16s, Fireflys, Jet 14s, and Jollyboat.

Woody Underwoods International 12 appears to be one of the first in the production run. Woody comments:
"My father bought this boat (# 31) in 1940, and it could be the first boat I ever sailed in. He was away in the service after that, and the boat was washed off its float in Padanaram in Hurricane Carol, ending up in the bushes 2 miles away. About 1960, we put in an Interclub mast, and I have sailed the boat on and off since then. Condition is good, albeit dried out.

Woody and Josie Whoolam sailing in the 2015 Archipelago Rally. Woody has retained the natural mahogany veneer look on the outside of the hull.

Photo from Rufus Van Gruissen

The International 12 was designed by International 14 designer, Harry Hall, who lived in New Rochelle, New York.

Photo from Woody Underwood

The first hot molded boats had very little internal structure - a feature designed to show off the strength of the new construction. The lack of ribs and stringers was a source of amazement to most.

Photo from Woody Underwood
The wood International 12 was also used by the U.S. Coast Guard Academy for their sail training and dinghy racing program.

Photo from Woody Underwood

Ernest Ratsey sailing the International 12 prototype in the summer of 1940.

The Rudder, October 1940


On a slightly different topic but still about the 2015 Archipelago Rally:

One cannot wrap up the 2015 Archipelago Rally without featuring the latest video report from the Tuthill Sisters. Last year, in the 2014 Rally, the younger sister had to become a human sidestay when the mast on their dinghy started falling over. This year the duo rolled out a Sailfish for the race, a choice that looked like a safe bet compared to their previous rickety dinghy and the slow - slow Snark, but the Sailfish has no cockpit and, sometime during the race the older sister ended up in the drink (she kept filming though).



Read More..

Rabu, 23 Maret 2016

Scows at the 2015 International Moth Worlds

Seven Australian scows, a mixture of old and new, are sailing in the 2015 International Moth Worlds hosted by the Sorrento Sailing Couta Boat Club, Victoria, Australia. For news on the 2015 Moth Worlds, it is worth clicking over to the popular Sailing Anarchy blog for Mr. Clean has been omnipresent, recording races live, doing interviews and documenting the ups and downs, both on-shore and in-the-water, of the professional programs that dominate the hi-tech foiler crowd. The scows are definitely the amateur, old-fashioned, side-show in this regatta, but, to Sailing Anarchys credit, they have been devoting some of their coverage to the scow crowd.

Back in September, Aussie Mark Hughes, wrote me an email with some links to a flat-pack scow kit he had designed and, from which, one hull had been built over the 2014 Australian winter. It was a modified Ray Hilton Bunyip IX design (the plans which have been posted on this blog). It consists of pre-cut carbon/foam pieces which are assembled inside a snap-together jig, also supplied in the kit. Pretty nifty but there were some unanswered questions I had about the construction. (Such as how do you get the carbon/foam panels to bend into the jig?)

Mark has a blog on his M-Scow-03 design which offers up, for free, the plans for this scow Moth. There are 10 PDF plans as well as CAD cut files available for download.

Here is one of his PDF sheets. Very high quality CAD work here. Again to open this PDF in another tab, click on the pop-out icon (the box with the upward facing arrow, upper right corner).





Ah, it seems the blogmeister has lost his train of thought and digressed away from the scows in the 2015 Worlds...but, patience dear reader, there is a connection. It turns out the Brian Sherring, the owner and builder of the first M-Scow-03 is sailing at the Worlds and he was the subject of a Mr. Clean interview which can be seen over here on Facebook.

There are two other scow photos of interest from the 2015 Moth Worlds, both of them Im reposting from Sailing Anarchy (again a TOH to Sailing Anarchy for covering some of the scow stuff).

Father/son team, Ian (dad) and Andrew Sim (son) in front of their scows. Andrew is sailing a 1980s vintage Stunned Mullet design. The blond wood decks are lightweight hoop pine plywood, which was an Aussie-only product of the 1980s and no longer available. His dad, Ian, is sailing a more modern foam/glass scow design. (Photo from Sailing Anarchy)


Wednesdays racing for the Worlds was canceled when a vicious low decamped over Sorrento. One of the French father/son combo, either Jim or David, decided to take his scow out for a burn in the gale. (Photo from Sailing Anarchy)



Its also apropros to repost this YouTube on the Aussie Scow Moth (Ian Sim is the fellow who is last up in this video):



Read More..